When I was faced with the annoying problem of an orange blinking light on my Fire Stick remote, I set out on a mission to identify the reason and come up with a fix.
My search led me to the confusing Amazon Fire Stick support forums, where I read multiple missives written by Amazon Staff that painstakingly described the exact cause of the perplexing orange light and offered a wide range of solutions to treat the uncomfortable condition.
How to Resolve Blinking Orange Light on Fire Stick Remote
An endlessly blinking orange light on your Fire Stick remote is a sign that your device is stuck in discovery mode and trying to connect, so if you encounter this issue, don’t panic. Resetting your remote to factory default is a workable way to get out of this jam. This may be done by holding down the Back, Menu (represented by three horizontal bars), and Left Navigation Circle buttons all at once for at least 10 seconds.
However, you may manually enable discovery mode by pressing and holding the home button for roughly 10 seconds on your Fire Stick remote in order to activate the orange blinking light.
If your goal is to exit discovery mode, you might find the following instructions for resetting your remote to be especially helpful.
Perform a Factory Reset on Fire Stick Remote
Please follow the detailed, step-by-step instructions that follow, which were painstakingly chosen by Amazon to ensure that the factory reset procedure for your Fire Stick remote is carried out correctly.
You must strictly adhere to these instructions because you might not have previously tried all of these suggestions.
Steps to Factory Reset Fire Stick Remote
You can do a factory reset by following these 8 steps if your Fire Stick remote is blinking orange.
- For at least 12 seconds, simultaneously press and hold the Back, Menu (seen as three horizontal bars), and Left Navigation Circle buttons.
- Release the buttons and give the remote 60 seconds to perform a factory reset.
- In addition to unplugging your Fire Stick from the TV and power adapter, remove the batteries from your remote control.
- 60 seconds should pass.
- Reconnect the TV and power adapter to your Fire Stick.
- Watch your TV until the Fire TV menu appears.
- Place the remote’s batteries back in.
- To reconnect with your remote when in the Fire TV menu, press and hold the Home button for 40 seconds.
You should be able to reset your Fire Stick remote and fix the orange blinking light problem by following these instructions precisely.
Troubleshooting Steps for Fire Stick Remote Blinking Orange
Resetting the factory settings may be effective in solving the current problem if one experiences sporadic troubles with the Fire Stick remote.
However, it might be wise to read the following additional troubleshooting methods provided directly by Amazon workers if you are still having issues and the remote keeps blinking orange nonstop.
Batteries of Remote may have drained
It’s true that occasionally the answer to a problem is less complicated than we first believe. When repairing a remote, it is definitely a good idea to check the batteries first.
It’s crucial to check that the batteries’ positive ends are pointing in the right direction because doing otherwise could result in the remote malfunctioning or not functioning at all.
Maybe there is a Software Update
It is essential to make sure your Fire Stick or Fire TV is running the most recent software version. This is due to the possibility that executing an outdated software version could result in a bug or problem that has already been fixed in the most recent upgrade.
To update your Fire Stick device, follow these six simple steps:
- On your Fire TV, navigate to Settings.
- Select My Fire TV.
- Choose About.
- Click on Check for System Update.
- To update your Fire TV remote’s software, go to your Fire TV Settings and select Controllers and Bluetooth Devices.
- Click on Amazon Fire TV Remotes and select your remote from the list. If an update is available, you can install it from there.
Additionally, until the orange light starts flashing, hit and hold the Home button for roughly 10 seconds. When pairing, make sure your remote and Fire Stick TV device are close to one another.
Loose Connections
Check all of your connections carefully if you’re still having problems with your Fire Stick or TV. To make sure the Fire TV Stick is getting power, I particularly advise looking at the connections between the outlet, power adapter, and Fire TV Stick.
Checking the connection between the Fire TV Stick and the HDMI port is also essential. I advise trying a new HDMI port if the one you’re currently using isn’t working properly to see if that fixes the problem.
Minimize Appliance Interference for Optimal Fire Stick Performance
It’s crucial to evaluate where other electrical devices will be placed in order to prevent any potential interference with your Fire Stick device. The Fire Stick may experience interference from other devices or appliances and stop working.
It is advised to place your Fire Stick a little bit away from your TV and other electrical equipment, according to Amazon. It could be challenging to detach the Fire Stick from your TV because that is how it is usually connected.
However, you can strive to leave some space between them so that the Fire Stick doesn’t lay flat against your TV. This can enhance the functionality of the device and lessen any potential interference.
Tip: To guarantee proper signal transmission, it is advised to keep your Fire Stick remote control within 3 metres (about 10 feet) of your Fire Stick TV device. Try getting closer if you’re having trouble receiving a signal while using the remote from a greater distance.
Bluetooth Error
Some Fire TV models and other brands of clever TVs have Bluetooth capabilities. It would be prudent to think about unplugging a few of the Bluetooth-enabled devices that are connected to your excellent TV if there are seven or more of them.
Make an effort to connect your Fire Stick remote and the TV while they are still apart. On occasion, the connectivity of the remote can be impacted by the simple number of Bluetooth devices that are synchronised at once.
Multiple Gadgets
Present-day Amazon Fire TV products are so widely used that many households have multiple units of the same kind of device. Your remote may have some troubles as a result of this.
It is important to make sure that your remote is not in sync with any of the other Fire TV devices if you are one of the people who has many Fire TV devices in your home.
Even though this circumstance is rather common, if you are ignorant of it, it can be extremely frustrating. You should not experience any inconveniences if you keep your Fire TV devices at a reasonable distance from one another to avoid this.
Use Phone/Tablet as temporary remote
There is an alternate strategy available if all previous attempts have failed and the indicator on your Fire Stick control keeps flickering in an orange tint. One can act as a temporary remote using their own mobile device.
Yes, these are the five steps to using your tablet or smartphone as a temporary Fire Stick remote:
Step 1: First, get the Fire TV app.
You must first download the Fire TV app before utilising your personal mobile device as a temporary remote.
Step 2: Verify That Your Devices Are Connected to the Same Wi-Fi Network.
The Fire TV app won’t function until both your personal mobile device and the Fire TV device are linked to the same Wi-Fi network.
Step 3: On your mobile device, launch the Fire TV app.
Open the Fire TV app on your own smartphone once both devices are linked to the same Wi-Fi network.
Step 4: From the screen, choose the Fire TV device.
Select the Fire TV device you want to operate from the screen after opening the Fire TV app on your smartphone.
Step 5: adhere to the on-screen directions.
Finally, follow the on-screen instructions to control the chosen Fire TV device by using the on-screen keyboard, menus, and on-screen navigation.
Wrapping it up
Your Fire Stick remote is stuck in discovery mode and making an attempt to connect if it is flashing an orange light.
The most common remedy to this problem is to perform a factory reset on your Fire Stick control, which should solve your problem and usually resolves most occasional issues.
If you still see an orange light on your remote that is blinking, try the following troubleshooting steps:
- Keep other devices from interfering
- Make sure your remote is 3 metres (10 feet) or less from your Fire Stick gadget.
- Check the condition of the AAA batteries in your remote control.
- Make sure that none of the many Fire TV devices you own are accidentally pairing with your remote control.
- If your smart TV is connected to seven or more devices, try disconnecting some of them before pairing your remote again.
- Verify all of your Fire Stick and TV device connections.
- Make sure that your TV and remote control are both on the most recent Fire Stick software.
- If all else fails, you may download the Fire TV app on your smartphone or tablet and use it as a makeshift remote.
Please follow these instructions to resolve the blinking orange light problem with your Fire Stick controller.