My family and I were excited to watch Netflix one Friday night, but to our dismay, our Hisense TV would not turn on. My original thought was that the TV had a hardware problem and we would need to buy a new one.
In an effort to avoid making a costly purchase, I turned to the internet to look into potential remedies. Fortunately, I found a quick repair that solved the problem immediately and got our TV working in less than a minute.
How to Turn On Hisense TV?
A power-cycle is the answer for a Hisense TV that won’t power on. Remove the TV’s plug from the wall first. Next, keep depressing the TV’s power button for 15 seconds. Release the power button after the initial 15 seconds, then wait an additional 30 seconds. Reconnect the TV’s cable to finish.
Troubleshooting Hisense TV
Reset Hisense TV
Don’t freak out if your Hisense TV won’t turn on. Power-cycling your TV is the first thing you ought to try. This entails turning it OFF before turning it back ON. Even though it might seem too simple, it frequently works.
The steps you should take are as follows:
- Remove the Hisense TV’s wall plug.
- Your TV’s power button should be pressed and held for 15 seconds. Make sure to use the TV’s power button and not the remote when turning it on. This will assist in removing any remaining power from the capacitors in your TV, enabling a proper reset.
- Before plugging your TV back into the wall, wait 30 seconds. Never connect your TV to a surge protector since they frequently malfunction and can’t supply enough voltage.
- Prior to plugging your TV back in, you must be patient and wait the full 30 seconds. Your Hisense TV ought to turn on without any trouble after you plug it back in.
Most users should be able to switch on their TVs with this straightforward remedy, although a tiny minority might still have trouble. If so, you might need to look for more help.
Reset Hisense TV Remote
Before hiring a professional, try one more thing if power-cycling your Hisense TV didn’t fix the problem. To reset your Hisense remote, follow these steps:
- Take both batteries out and the back of your remote control off. This assures that the capacitors in the remote control have no remaining power.
- Press and hold the remote’s power button for 30 seconds while removing the batteries. This resets the remote and aids in removing any remaining power from its capacitors.
- Replace the batteries in your remote control after 30 seconds of holding down the power button.
- Attempt to switch on your TV. To make sure the present batteries aren’t dead, try installing a new set of batteries if the remote is still not working.
You might be able to reset your Hisense remote and get your TV operating again by following these easy instructions without needing to contact a professional.
Wrong Input Channel
It’s possible that you’re on the wrong input channel when your Hisense TV seems to be off sometimes. It can look that your TV is off if it is actually linked to a cable box through HDMI but your TV input is set to something else.
Start by selecting the input/source button on your Hisense remote to address this problem. Continue clicking until you find the proper input channel. You can still change the input channel on your TV by using the buttons if you don’t have a Hisense TV remote or if it lacks an input button.
You ought to be able to diagnose and resolve the majority of issues that emerge with your Hisense TV by following these straightforward steps. However, if you’re still having problems, it could be time to get in touch with a specialist or the product’s maker for more help.
Plug Tv in different electrical outlet
Because to a malfunctioning electrical socket, a TV could occasionally fail to switch on. You should try inserting your Hisense TV into a different electrical socket to solve this problem. You can tell that your TV isn’t the issue if it powers on using the new outlet.
Check the breaker panel box in your home if your TV still won’t switch on. Typically, a utility closet in the basement houses this unit. There are numerous different breaker “switches” inside the box. Each of these switches needs to be firmly set to ON.
Breaker switches that appear to be halfway between ON and OFF or completely OFF should be turned OFF and then back ON. Keep the switch in the ON position at all times. Remember that you MUST first flip the switch OFF before flipping it ON if it has been tripped and is in the middle. It won’t stay ON if you try to move it right away.
After doing this, the breaker will be reset, and you can check to see if the electrical outlet now functions. You should be able to establish whether the electrical outlet is the problem by following these easy instructions and get your Hisense TV powered on in no time.
Ensure power cord is proper
Yes, here is an English translation:
The power cords on a number of Hisense TV models are notorious for coming away from the rear of the device, which can prevent the TV from turning on.
Follow these actions to resolve this problem:
- Disconnect the power cord by locating the location where it attaches to the TV’s back.
- Before re-connecting the power cord, wait 30 seconds.
- When reconnecting the power cord, make sure it is tight and stable. It might need to be pushed in firmly.
- Use the power button on your Hisense TV rather than the remote to turn it on.
- Avoid moving or bumping your TV because even minor motions can re-loosen the power cord.
There is Hardware Problem
If you’ve come to this point, your Hisense TV most certainly has a hardware problem that can be challenging to resolve. But identifying the problem is much easier.
- Turn off all of the room’s lights before checking your TV’s back vent for any indications of light coming through the openings. To conduct this test on a TV without a vent, you’ll need to take off the back panel.
The main board or T-Con board of your TV is probably the problem if the backlights are on but there is no image on the screen. To identify the problematic board, you must replace each one. Replace the T-Con board first if your TV still has audio and the backlights remain operational.
- Turn off the room’s lights, turn on your TV, and access the TV menu if your TV’s backlights aren’t working. Position yourself 6 to 12 inches away from the television and shine a torch or the flash from your smartphone onto the screen.
Check to see if you can make out the menu by carefully observing the screen. If you can only make out a very faint outline of the menu, try different lighting setups and viewing positions.
If an image is visible, your main board and T-Con board are in good working order, but your inverter or LED driver is broken. You may need to replace the power-supply board in some Hisense TV models because the inverter or LED driver is integrated into the board.
Use Hisense TV Warranty
In the event that all other attempts to get your Hisense TV to switch on fail, you might want to see if your TV is still under warranty. Make contact with Hisense support and describe the problem.
If the problem is covered by warranty, they will either repair or replace your TV after determining whether or not it is. Even in-home services are available from Hisense for some warranty claims. Worth a shot, I say!
Wrapping it up
In conclusion, don’t freak out if your Hisense TV won’t switch on! Before giving up and purchasing a new TV, there are a number of things you can try. Make sure the power cord is firmly attached, power cycle your TV and remote control, then check the input/source channel to begin. The main board, T-Con board, or power supply board may need to be replaced if the above measures don’t resolve the problem.
If all else fails, see if your TV is still protected by the warranty. You might be able to restart your Hisense TV with a little perseverance and troubleshooting. Before investing in a new TV, it is a good idea to verify your TV’s warranty if you have tried all of these solutions and it still won’t switch on.