Insignia TVs are well-known for being reasonably priced and having excellent features, which makes them a popular option for many households. However, just like any electronic device, they occasionally experience issues that prevent them from turning on.
It can be irritating if your Insignia TV won’t turn on, especially if you’re trying to catch up on your favourite shows or sports. In this post, we’ll examine the typical reasons why an Insignia TV won’t switch on and offer some doable fixes so you may cure the problem and resume enjoying your TV.
How to Turn On Insignia TV?
You can try resetting your Insignia TV by following these instructions if you experience an issue with it not turning on:
- Pull the plug on your TV and give it a full 60 seconds before plugging it back in.
- Press and hold the power button for 30 seconds with the TV unplugged.
- Reconnect your Insignia TV’s power after the 60 seconds have passed, then try turning it on once more.
This procedure can help the TV’s internal system reset by allowing any remaining power to drain from its capacitors. If the issue continues, it can be a more serious one, in which case you should think about calling Insignia support or hiring a professional repair service.
Troubleshooting Insignia TV
Unplug Insignia TV
The most common repair for an Insignia TV that won’t switch on is to unplug it from the wall socket and wait for a full 60 seconds. While the TV is unplugged, it’s crucial to wait the full minute and to hold the power button for 30 seconds.
This allows the TV to gently reset itself and drains any remaining power in it. After the 60 seconds, plug the TV back in, and it should turn on without any problems.
If you’re still having trouble getting your Insignia TV to switch on after using this method, there might be other problems at hand. We’ll look at some further potential solutions in the section after this one.
Reset Insignia TV With Remote
Make sure your Insignia TV is turned on before performing a factory reset. Press the Home button on your remote to access the Settings menu after that. Choose Device & Software, followed by Reset to Factory Defaults, from there. After that, the initial setup screen will appear on your TV before turning off and on once more.
The factory reset procedures for older Insignia TVs could be slightly different. To return the TV to its factory settings, go to Settings > System > Advance System Settings > Factory Reset > Factory Reset Everything.
Reset Insignia TV Without Remote
You can still do a factory reset on your Insignia TV even if you don’t have access to the remote control. Find the power button on your TV first; it may be at the bottom, on the right or left side. Press and hold the power button after unplugging your television. Reconnect the TV while continuing to hold the button.
The Insignia logo and a Recovery screen should both show. To get the “wipe data/factory reset” option, press and hold the power button until the choice appears green. When asked whether you are certain you want to reset the TV, choose “Yes” and watch for it to finish. Choose “reboot system now” to finish.
Keep in mind that your Insignia remote will no longer function after a factory reset. Point the remote at the TV and hold the HOME button down for 10 seconds to repair it. Then, try using the remote once more after a brief delay. You can try using a USB keyboard or a universal remote with the correct Insignia code if you don’t have the Insignia remote.
Other Methods to Reset Insignia TV
There are alternative methods to reset your Insignia TV if you can’t locate the reset button or if it’s tough to access because of the TV’s tight mounting. One alternative is to use a USB keyboard that has been plugged into the back of your TV to navigate and reset it.
As an alternative, you can download the Amazon Fire TV app on your smartphone and link it to your TV if you own an Insignia Fire TV. The TV can then be reset using the remote from your smartphone.
To get your universal remote to operate with your TV, you can also try typing the correct Insignia code on it. You might try some extra troubleshooting steps before giving up if these instructions don’t cure your power problems.
Check Insignia TV Remote Control
Remove the batteries from your remote control if unplugging and replugging your Insignia TV does not fix the problem. Make sure to completely remove both batteries.
Hold down the remote control’s power button for a full 30 seconds while the batteries are out. Reinstall the batteries and attempt to switch on the TV after the allotted 30 seconds have passed. It ought to turn back on.
To make sure the batteries are not running low, you could also wish to replace them with fresh ones during this stage.
You might want to try factory resetting your Insignia TV for a more long-lasting remedy if one of these techniques fixed the issue but it reappears after a few days or weeks.
Plug Tv in different electrical outlet
An Insignia TV’s inability to switch on is typically caused by a power supply problem. This could happen if the TV is improperly plugged in, if the outlet is broken, or if there is a power surge or outage that affects the TV.
In other cases, the TV may have a faulty power cord or a broken power board, which prevents the TV from properly receiving or distributing electricity.
Ensure power cord is proper
The first step in troubleshooting your Insignia TV is to make sure the power source is functioning properly. Make that the TV is securely attached to a working electrical outlet and that the socket is not damaged or overloaded.
You can also attempt briefly unplugging the TV from the outlet and then plugging it back in. This can restart the TV’s power supply and possibly fix any momentary issues.
Software Issues
A software error occasionally prevents an Insignia TV from turning on. This could occur if the TV’s operating system or firmware is out-of-date, damaged, or incompatible with other connected devices like streaming, cable, or game consoles.
Additionally, a software-related issue may arise if the TV’s settings are incorrect or the remote control is not operating properly.
If your Insignia TV turns on but fails to display anything, you may need to update the firmware and settings. This can be done by accessing the TV’s menu and selecting the “Settings” or “System” option, then checking for any available firmware updates. If an update is available, follow the instructions to install it.
Updating the TV’s settings can also help fix any issues related to display or sound. Check the video and audio settings to make sure they are set up correctly for your specific TV and external devices. You may also want to try resetting the TV to its default settings to see if that helps.
Hardware Problem
A hardware issue that prevents an Insignia TV from turning on can be trickier to fix than a simple power or cable issue. In this situation, it might be required to get in touch with a qualified specialist for fixes or to replace the broken parts.
Without prior TV repair skills, it is not advised to try to fix internal hardware problems yourself since you could wind up doing more harm than good. If your TV is still covered by warranty, you might be able to get a free repair or replacement.
Use Insignia TV Warranty
You can ask Insignia customer service for help if none of the aforementioned fixes work or if you don’t feel confident diagnosing or repairing your Insignia TV on your own.
Depending on the warranty or service agreement you have, their support staff can aid you in determining the issue, offering viable remedies, and helping you repair or replace your TV. Depending on your desire and availability, you can contact Insignia customer service by phone, email, or chat.
Wrapping it up
It can be annoying if your Insignia TV won’t switch on, but there are steps you can do to diagnose and fix the problem. A power supply, hardware, or software fault is typically to blame for the issue. The power supply, the power cable and board, the internal parts, the firmware and settings, the remote control, and the customer service choices can all be checked first.
Before performing any repairs or adjustments, it’s crucial to handle electronic devices gently and to consult the user handbook and warranty information. You can find a solution and resume enjoying your Insignia TV if you are persistent and patient.