If your Sharp TV isn’t turning on for whatever reason, don’t worry; this problem is rather common and can be fixed with simple troubleshooting techniques. Try to carry out these steps to see if you can fix the TV without the help of a repairman before calling for assistance.
There are numerous steps that can be tried to fix the problem if your Sharp TV is having trouble turning on. These include inspecting the power supply, power cord, and remote in addition to resetting the TV, but are not limited to those.
This manual will clarify the most frequent reasons why a Sharp TV won’t turn on and go into detail about the solutions that can be applied.
How to Turn On Sharp TV?
A reset is required if your Sharp television appears to be unusable. Start by unplugging your TV from the power source and waiting for 60 full seconds before taking any further action. Apply pressure to the power button during the interim time of 60 seconds and maintain this motion for 30 seconds. After the aforementioned 60 seconds have passed, reconnect your Sharp television to its power source, and it should function normally.
Troubleshooting Sharp TV
Unplug TV from wall
The most effective way to get your Sharp TV to turn on again, despite the fact that it may seem crude, is to physically unplug it from the outlet.
The most important thing in this situation is to resist reconnecting it before the whole 60 seconds have passed. It is crucial to be patient and make sure a full minute has passed before re-connecting it to the power source.
Find the Sharp TV’s power button and press it steadily for 30 seconds while the TV is disconnected. Make sure you are pressing the TV’s power button and not the remote when you do this.
This action will aid in releasing any lingering energy inside the TV, allowing it to perform a soft reset. It should be noted that this action differs from just using the remote to turn the TV on and off!
The TV should turn on without a hitch after the 60 seconds have passed and you have attached it to the power source.
While this process should work in about 80% of situations, the remaining 20% may be a little trickier. Try the steps outlined below if you are still having trouble getting your Sharp TV to turn on.
Factory Reset Sharp TV
To perform a factory reset on your Sharp TV, follow these steps:
- Power on your TV and click the Menu button on your remote.
- Go to Initial Setup > Advanced > Reset > Yes.
- Your TV will turn off and on again, and then display the initial setup screen.
By doing this, you can return your Sharp TV to the configuration it was in on the day you bought it. The factory reset procedures for an older Sharp TV can be slightly different from those described above. You may get the specific instructions for doing a factory reset by going to Sharp’s website, entering the model number of your TV, and searching for the user manual for your TV.
Factory Reset Sharp TV Wihout Remote
You may still do a factory reset on your Sharp TV even if you don’t have access to the remote control or if your TV won’t power on.
Use Buttons on TV
First, unplug your TV from the wall before attempting this. Next, simultaneously press and hold the input and volume down buttons. Reconnect your Sharp TV while keeping these buttons depressed. Hold on until your TV restarts; this could take a few tries.
A blue “K” box should show in the top-left corner of your TV screen after it has started up. Press and hold the channel down and volume down buttons simultaneously at this point.
You can reset your TV to its factory default settings by selecting this option, which ought to bring up the factory reset menu.
This will launch the service menu on your Sharp TV. USE CAUTION! If you make a mistake here, you could significantly damage the main board of your TV.
To move between pages, use channel up and down until you reach page 2. Then, toggle using volume up or down:
- RESET to ON
- LAMP ERROR RESET to ON
- INDUSTRY INIT to ON and press Enter (or OK)
- Unplug your TV from the wall as soon as “Success” and a green screen appear on the screen.
Hold the power button down while the TV is still unplugged. Reconnect the TV while maintaining control of the power button.
Use Universal Remote
After trying every option, the use of a nearby universal remote that is already in operation offers a viable answer. When purchasing this device, enter the special code meant for Sharp products to check compatibility and fix any existing problems preventing functionality.
Use Roku App
Downloading the Roku app onto your mobile smart phone is another excellent option, provided you have a Sharp Roku TV.
You can use the app as a remote control after the app and your TV have connected successfully, eliminating the need for a real, physical remote.
Use USB keyboard
There are various alternate options available if you can’t find the buttons on your Sharp television or if the gadget is placed in a small area.
First, it could be worthwhile to consider whether it’s possible to attach a USB keyboard straight to the TV’s back. In doing so, the keyboard can be used to navigate the interface and start a system reset if that is what is required.
Force Turn On Sharp TV
You can try a forced turn-on by hitting the volume down, channel up, and power buttons on your Sharp TV all at once if it won’t turn on and the front logo is blinking quickly then slowly.
Your Sharp TV should turn on as usual when you hear a clicking sound. If this doesn’t work, try doing a factory reset using the instructions under “Buttons on side of your TV” instead of a remote control.
Reset Sharp TV Remote Control
If rebooting your television doesn’t fix the problem, try taking the batteries out of your remote control. Before continuing, it is essential to completely remove both batteries from the remote.
After removing the batteries, press and hold the power button on the remote control for exactly 30 seconds. This interval should be fully sustained and last for a full 30 seconds, not less.
Recharge the remote control’s batteries once the aforementioned 30 seconds have passed, then try turning on your television once more. Your TV should work as it should after doing this.
To ensure optimal effectiveness during this phase, it could be a good idea to think about changing the batteries with a brand-new set.
Plug Tv in different electrical outlet
It is vital to start by looking at the power source when dealing with a Sharp TV that won’t turn on. Make that the electrical socket has a working power supply and that the television is properly connected to it. Unplug the TV from the power socket for a while, then plug it back in to see if the problem can be fixed.
Make that the power strip is turned on and hasn’t tripped if one is being used. whether the power source is different, such as a generator, try plugging the TV into a separate electrical socket to see whether the problem still exists.
Ensure power cord is proper
Verifying the power cord is the next action. Verify that the power cord is firmly secured to the television and the socket, respectively. To ensure a safe and reliable connection if the power cable looks to be slack, check sure the connectors are tightened.
The power cable may be the main reason for the issue if it is damaged, ripped, or shows any signs of physical deterioration.
In this case, a replacement power cord must be purchased. Use a different power cord to see whether the problem persists if the power cord is properly connected and shows no evidence of damage.
Check if tv backlight is broken
Your Sharp TV’s backlight can be damaged if the previous troubleshooting techniques have failed.
Turn on your TV and position a torch in close proximity to the screen to see if this is the situation. When you flash the light, pay close attention to see if any image appears on the screen. A broken backlight that has to be replaced may be the cause of a hazy image.
If this is the case, you might wish to get help from a qualified repairman or Sharp customer service. Note that changing the backlight can be a challenging task and should only be undertaken by a trained technician.
Use Sharp TV Warranty
You can get more help from Sharp customer care if the problem still exists after you’ve tried the troubleshooting methods for your Sharp TV. You can get in touch with them in a number of ways, including by phone, email, live chat, or social media.
On the manufacturer’s website or in the TV’s manual, you may find Sharp’s toll-free number if you want to get in touch with them by phone. On their website, there is a contact form that you can use to send them an email.
Some Sharp websites offer live chat support, which enables you to communicate with a customer service agent in real time. Additionally, some Sharp customer service departments can be reached via social media sites like Twitter or Facebook, where you can ask for help by sending a direct message to their official account.
Please be aware that based on your area and the product you have, different support alternatives can be available. Check the Sharp website or the manual that came with your TV for more information.
Wrapping it up
In conclusion, you can try troubleshooting techniques including checking the power supply, power cord, and remote and resetting the TV if your Sharp TV won’t switch on. Consider contacting a repairman or Sharp customer service for more help if the measures listed above are unsuccessful.
For comprehensive instructions and answers to problems like a grainy or blurry image or setting up an internet connection, consult the TV handbook or the manufacturer’s website. Additionally, to ensure proper functionality, keep the software on your Sharp TV up to date on a regular basis.