I chose to buy a specific model for my TV lounge after a coworker suggested one. TCL has been making high-quality TVs and smart TVs for a while. My smart TV’s functions made me very delighted, and I looked forward to using it frequently.
But after a few months, my TCL TV suddenly stopped working while I was trying to play some video games. I tried to get it to work by checking all the cords, the remote, and the powerboard. I thus got in touch with TCL’s customer service to fix the problem.
It turned out that I had a motherboard problem, but the customer service representative offered me many fixes. A TCL TV may not turn on for a variety of reasons, such as hardware failure, harmed cables, or dead batteries in the remote.
I’ll go over numerous problems that can prevent a TCL TV from turning on in this article and offer solutions, such cleaning the ports on your TV or doing a hardware reset on your computer.
How to Turn On TCL TV?
If you’re having difficulties getting your TCL TV to switch on, start by making sure all the cords are properly attached. Keep holding down the power button for two minutes after unplugging your TV. Check whether the TV works by plugging it back in. If the problem continues, locate the reset button on the TV’s back and press it down for a short period of time.
Troubleshooting TCL TV
Check Status Light
Try unplugging the TV and holding down the power button for two minutes if your TCL TV won’t switch on and the status light isn’t working. Reconnect the TV’s power and check to see whether it powers on.
A different power outlet can be tried if that doesn’t work. The outlet you are using might not be operating properly.
If the problem persists, look for any obvious wear and tear or damage on the power cord. The power cord should be replaced if there is any damage.
Last but not least, if none of these fixes work, get in touch with TCL’s customer service.
Power Cycle TV
The last resort would be to do a power cycle if your television remained unresponsive despite the measures listed above. To force the TV’s operating system to restart, this entails turning off all of the electricity inside.
What you can do is:
- Start by unplugging the TV from the power source.
- For two minutes, hold down the power button on the TV itself, not the remote. This effectively drains the capacitors in the TV of any residual power.
- Reconnect the TV’s power supply.
- Next, try pressing the TV’s standard power button to turn it on.
- After completing this procedure, it might be required to seek professional assistance if the TV is still unresponsive.
You might choose to get in touch with TCL support to check and possibly prevent any servicing costs if your TCL television is still covered by warranty.
Reset TCL TV
When correctly connected, TCL TVs have standby lights at the bottom of the device that show whether the TV is on or off. This light can also indicate whether the TV is experiencing any faults or similar problems.
You should do the following actions if you push the On button and the status light blinks but the TV doesn’t turn on:
- Connect your TCL TV.
- On the TV’s back, look for the reset button. There is a little hole on the back panel that is often located between the USB and HDMI ports.
- To press the button, use a paper clip or something similar. Release it after around 30 seconds of holding it down.
- Try switching on your TV now.
- TCL TV factory reset
If the issue still exists, try repeatedly pushing the reset button without holding it down. Spend about 30 seconds doing it.
Reset TCL TV Remote
Sometimes the obvious answer we are looking for manages to elude us. Investigate the battery power levels if your television does not, for some reason, respond to the remote. Additionally, it would be wise to use batteries with superior quality and capability when changing the batteries in order to prevent battery leaks and prolong the useful life of your remote.
Wrong Input Channel
It’s possible that an erroneous input source is to blame if your TCL TV doesn’t seem to switch on. You must choose the right input source for your TV in order to resolve this problem.
Whether you’re using a streaming device, DVD player, or cable box, check that the HDMI port number on your TV matches the source or input.
Here are two techniques for choosing the right input source:
Using a remote control, activate the input source
- Turnon your television
- Put your remote control’s Source button into action.
- Choose the preferred input mode.
Change the input source without a remote
- Turn on your television
- On the TV’s side or bottom, press the MENU button.
- To access the source menu, use the volume button.
- Select the preferred input source by pressing the menu button.
You can choose your preferred input source by pressing the source button on some TVs, which are usually located on the side or rear.
Plug Tv in different electrical outlet
It might not always be a problem with the television or the cables if your TCL TV won’t switch on. It’s possible that the issue is with the power outlet itself.
Unplug the TV’s power cord to confirm this, then try plugging another item into the same socket to see whether that one also turns on. You might have a dead power outlet if the appliance won’t turn on.
To see if the TV turns on in this situation, try plugging it into a different outlet. If so, the power outlet rather than the TV was the issue.
Ensure power cord is proper
Start by examining the power cord connection if your TCL TV still won’t turn on. Ensure that it is firmly plugged into the power outlet and the TV.
The problem might be brought on by the use of a surge suppressor or extension cord. Try immediately plugging the TV into a different working outlet.
Verify the connections of all additional cables and cords as well. To make sure the cords are secure, it’s a good idea to unplug and reattach each one separately. Pay close attention to the HDMI cables because they can frequently cause issues if not connected completely.
Check all connections before attempting to turn the TV back on. Don’t panic if the TCL TV still won’t switch on. You can take extra actions to investigate the problem.
Clean Your TV Dust
Electronic gadgets may experience a number of problems due to dust and filth. The proper transmission of signals might be hampered by collected dust since electronics contain delicate connectors for transferring power and data.
Use an electronics cleaning kit or a small brush to remove all the dust from your TCL TV to prevent this problem. Be cautious when cleaning ports and power points and go slowly to prevent permanently harming the connectors.
It is not advised to try to replace the defective LED yourself if your LED TV won’t switch on because of it, especially if you have no expertise doing so. It is a difficult repair that calls for knowledge and specialised equipment. Making an attempt on your own could make things worse or harm the TV more.
Instead, we advise having the TV serviced by a pro. To find out about warranty or repair alternatives, you can get in touch with the manufacturer’s customer service. They can assist you discover a trained technician who can identify and address the issue, as well as give you the information you need.
Use TCL TV Warranty
When all other options have been exhausted and your TCL TV still won’t turn on, it may be time to get in touch with TCL support. They can send a professional to look at your device and solve any issues you might be having after you explain the problem to them.
Wrapping it up
In conclusion, if your TCL TV won’t come on, there could be a number of causes, many of which have easy fixes you can try on your own. But if the problem continues, it’s best to get support from a hardware shop or TCL if you can.
Always use high-quality cables when you shop so they will last longer and be less likely to get damaged. Checking your home for voltage fluctuations that can eventually result in equipment failures is also a good idea.